Linx Dipole Antennas

CW Series 1/2-wave dipole antennas deliver outstanding performance and wide bandwidth in a rugged and cosmetically attractive package. These antennas feature a standard SMA or FCC Part 15 compliant RP-SMA connector.

Designed for permanent attachment, PW Series 1/2-wave whips give outstanding performance in a rugged and cost-effective package.The antennas internal counterpoise eliminates dependence on external ground plane. The antenna is attached through a 1/4" hole in the product, or by threading it into a PEM-style insert. The antenna attaches to a PCB or connector via an 8.5-inch RG-174 coax cable. Custom lengths and terminations are available by special order.

Designed for permanent attachment, the PML Series features an internal, center-fed 1/2-wave element, eliminating the need for a ground plane, and an articulating joint which enables the antenna to tilt 180 degrees. The antenna mounts through a 1/4" hole in the product and is secured with a nut or PEM-style insert.

HW Series antennas deliver outstanding performance in a rugged and cosmetically attractive package. The 315, 418, and 433MHz monopole versions have a 1/4-wave element. The 868 and 916MHz dipole versions have a center-fed 1/2-wave element with an internal ground reference. The antennas attach via a standard SMA or Part 15 compliant RP-SMA connector.

HWR Series antennas deliver outstanding performance in a rugged and cosmetically attractive package. The articulating base allows the antenna to tilt 90 degrees and rotate 360 degrees. The 315, 418, and 433MHz versions have a 1/4-wave element. The 868, 916MHz and 1.4GHz versions have a center-fed 1/2-wave element with an internal ground reference.

The RCT 1/2-wave antenna delivers outstanding performance with an innovative articulating base that allows it to tilt and rotate for optimum orientation. The antenna's internal counterpoise eliminates external ground plane dependence and maximizes performance. The RCT attaches via a standard SMA or Part 15 compliant RP-SMA connector.

This stylish 1/2-wave omni-directional antenna features an internal counterpoise which eliminates external ground plane dependence and maximizes performance. A wide bandwidth and low VSWR make the CT antenna an excellent choice for any application requiring an affordable, cosmetically attractive, dipole antenna. The antenna attaches via a standard SMA or Part 15 compliant RP-SMA connector.

The RCL Series is useful in products where additional height above the product's case is needed or a slightly wider operational bandwidth is desired. The 2.45GHz version has a center-fed 1/2-wave element with an internal ground reference. The 916MHz version has a 1/4-wave element. The antennas attach via a Part 15 compliant RP-SMA connector.

The RAF is a compact, cosmetically attractive, dual-band, 1/2-wave antenna covering the popular 2.45GHz and emerging 5.8GHz bands. The antenna features a tilt and swivel joint which allows it to be oriented at straight or right angles to the product or conveniently folded for storage and shipment. It attaches using an SMA or FCC Part 15 compliant RP-SMA connector.

The WRT Series antenna is ideally suited for applications such as wireless vending, security, traffic, or power equipment which require an unobtrusive, tamper-resistant antenna solution. The tiny 19 x 11mm radome installs through a small hole on the product and is anchored by a threaded base.

MHW Series dipole antennas feature a durable, unobtrusive housing that sticks permanently with integral adhesive to flat, non-conductive surfaces such as windows, drywall, ceiling tiles, plastic, etc. The antennas are well suited to low-power devices, but are capable of operation at levels to 10 watts.

The HDP Series is a compact, center-fed antenna that achieves efficient operation at either or both of two frequency bands. Its durable, unobtrusive housing attaches permanently with integral adhesive to flat, non-conductive surfaces such as windows, drywall, ceiling tiles, plastic, etc.

The VDP Series is a compact, center-fed antenna achieves efficient operation at any or all of three frequency bands. Its durable, unobtrusive housing attaches permanently with integral adhesive to flat, non-conductive surfaces such as windows, drywall, ceiling tiles, plastic, etc.

These inexpensive sleeves cover a low-cost internal element of a user's choosing (i.e., a wire, rod, or flexible shaft). They provide the ruggedness and cosmetic appeal of expensive whip antennas at a fraction of the cost and are designed to allow a wide range of mounting options.