Products and Services

  1. SkyOne® Ultra 2.0 Front-End Module For FDD/TDD LTE Bands: SKY78117 5/31/2016

    The SKY78117 SkyOne® Ultra 2.0 is a multimode multiband front-end module (FEM) designed for optimal performance in FDD/TDD LTE-modulated handsets for bands 7, 30, 38, 40, and 41. The RF input and output ports are internally matched to 50 ohms which minimizes the need for external components.

  2. LNA Front-End Modules With BDS/GPS/GNSS Pre-Filters: SKY65713-11, SKY65715-81 12/28/2015

    The SKY65713-11 and SKY65715-81 are global navigation front-end modules (FEM) with integrated low-noise amplifiers (LNA) and pre-filters designed for Beidou Global Positioning System/Global Navigation Satellite System (BDS/GPS/GNSS) receiver applications. These devices feature high linearity, excellent gain, a high 1 dB input compression point (IP1dB), and a superior noise figure.

  3. 2.4 GHz Front-End Modules 8/26/2022

    Skyworks offers a range of 2.4 GHz Front-End Modules designed to provide all the functionality of a fully matched power amplifier, power detector, harmonic filter, low-noise amplifier (LNA), and single-pole, double-throw (SPDT) switch in one device.

  4. 8 - 12 GHz 5 Watt Transmit / Receive Module: QPF5005 3/7/2023

    QPF5005 is a multi-die front-end module (FEM) designed for 8 - 12 GHz X-Band applications.

  5. 2 - 18 GHz 10 Watt Transmit/Receive Module: QPF0219 6/7/2023

    QPF0219 is a multi-chip Front-End Module (FEM) designed for 2-18 GHz Wide-Band radar applications. The FEM integrates a T/R switch, a limiter, a low-noise amplifier and a power amplifier.

  6. 37 – 40.5 GHz GaN Front End Module: QPF4006 3/6/2018

    The QPF4006 from Qorvo is a multi-function GaN MMIC front-end module (FEM) ideally utilized for 39 GHz phased array 5G base stations and terminals. This device operates over the 37 to 40.5 GHz frequency range, and combines a low noise, high linearity LNA, a low insertion loss, high isolation TR switch, and a high gain, high efficiency multi-stage PA.

  7. SkyLiTE™ 2.0 Next Generation Front-End Solutions Powering LTE Devices 4/14/2016

    The SkyLiTE™ 2.0 Front-End Modules are part of a highly integrated platform enabling smartphone manufacturers with complete front-end systems that meet today’s carrier aggregation (CA) design challenges. These devices are baseband agnostic and are designed to incorporate the amplification, switching, Wi-Fi filtering, and coupler functionality required to support all major FDD/TDD bands. SkyLiTE™ 2.0 addresses new global downlink CA performance standards with an integrated diplexer and harmonic filtering functionality. This series is optimized for regional use, providing OEMs with scalable and reconfigurable architectures for faster time to market.

  8. Front-End Modules With Integrated Duplexers For Cellular/Smartphone Applications 4/25/2017

    Skyworks offers new front-end modules (FEMs) with integrated duplexers for multiple cellular/smartphone applications including 2G/3G/4G multimode handsets, carrier aggregation, and embedded data cards. Each FEM features integrated broadband directional couplers enabling high efficiency, low insertion loss, high isolation, and excellent, low-band harmonic performance.

  9. Front-End Module (FEM): AFEM-S102 4/14/2011
    Avago Technologies AFEM-S102 Front-End Module (FEM) integrates an SP3T antenna switch, TX path Coupler and FBAR Co-Existence Filter for applications with IEEE 802.11 b/g/n WiFi and Bluetooth modulation.
  10. 5 GHz C-V2X /DSRC/Wi-Fi Front End Module For Automotive Applications: QPF1003Q 10/13/2020

    The QPF1003Q is an integrated front-end module (FEM) designed for multi-standard systems such as C-V2X, DSRC/11p, and Wi-Fi. The QPF1003Q integrates a 5 GHz power amplifier (PA), TX/RX Antenna switch and bypassable low noise amplifier (LNA) into a single device. The compact form factor and integrated matching ideally minimizes layout area in automotive applications.