Products and Services

  1. RF Amplifier With 19" Rack Mount: KAW4040-M12 8/26/2022

    The KAW4040-M12 is a Class AB wideband amplifier system delivering 500 Watts CW power into a 50-Ohm load over the 200MHz-500MHz frequency range with custom optimization over the 390MHz-410MHz range.

  2. RF Power Amplifier: KAW2020M16 8/15/2022

    The Model KAW2020M16 is a Class AB wideband RF power amplifier delivering in excess of 100 Watts into a 50-Ohm load over the frequency range of 220MHz to 245MHz. 

  3. C-Band Power Amplifier: QPA0506 8/9/2022

    Qorvo's QPA0506 is a 4-watt MMIC power amplifier. Covering 5-6 GHz, the QPA0506 typically provides 36dBm of saturated output power and 18dB of large-signal gain with 53% power-added efficiency.

  4. 1.0–18.0GHz, 50W Solid State Power Amplifier System: Exodus AMP2107ADB-2 3/10/2021

    The Exodus AMP2107ADB-2 is a superb 1.0–18.0GHz, 50-Watt Amplifier System. This dual-band amplifier features 47dB Minimum Gain, Type N Female RF Input, Sample & RF output ports.

  5. 10 - 13 GHz Dual Channel Low Noise Amplifier: QPL2210 11/18/2020

    Qorvo delivers the QPL2210 dual channel high-performance, low noise amplifier fabricated on Qorvo’s production 90 nm pHEMT process. Covering 10 – 13 GHz, the QPL2210 provides 16 dB small signal gain and 1.2 dB noise figure. With a compact die size of 3 x 3 mm, the amplifier can deliver 5 dBm of saturated power with a high linearity of 8 dBm of output TOI at Pin = - 25 dBm/tone.

  6. NuPower Xtender™ L-Band And S-Band Bidirectional Amplifier: 12B04A-D30 11/11/2020

    The NuPower Xtender™ 12B04A-D30 is a bidirectional amplifier module featuring a small, broadband, high-performance RF amplifier that generates 10 watts of RF power across the L- and S-band frequencies of 1.0 to 2.5 GHz. It is ideal for use in extending the communication range of half-duplex L- or S-band transceivers running constant-envelope or near-constant-envelope waveforms.

  7. 6.0 – 18.0 GHz, 50W Solid State High-Power Amplifier 11/2/2020

    The AMP2033LC is a solid-state, high-power amplifier designed for use in broadband EMI/RFI, lab, communications, and EW applications operating in the 6.0 – 18.0 GHz frequency range. It is also suitable for CW, pulse, and all single channel modulation standards.

  8. 1000 watts CW, 1.0 GHz – 2.5 GHz Microwave Solid State Amplifier: 1000S1G2z5B 10/26/2020

    AR’ model 1000S1G2z5B is a solid state, air-cooled broadband amplifier ideally used for applications where instantaneous bandwidth, high gain, and linearity are required. When used with a sweep generator, the amplifier provides a minimum of 1000 Watts of RF power. It is designed to operate from 1.0 GHz to 2.5 GHz.

  9. Liquid Cooled, Hot Swappable SSPA Family For High Power Applications 9/9/2020

    Empower RF offers a family of liquid cooled, hot swappable SSPAs for high power applications. These devices feature new, scalable, solid state designs that replace tube technology for applications requiring tens and hundreds of kilowatts of CW and pulse power with frequency coverage from HF to X-band.

  10. Tri-Band Bidirectional Amplifier: NuPower Xtender™ SCISR-20 8/4/2020

    The NuPower Xtender™ SCISR-20 is a tri-band bidirectional amplifier intended to simplify subsystem architecture with a compact form-factor to provide in-band and cross-band bidirectional communication for improved link margin. The 20-Watt amplifier is ideal for use in unmanned aircraft systems, small to medium sized aircraft, and airborne datalinks, and more.