Products and Services

  1. FFT Analyzer: EHP-50F 6/2/2015

    The EHP-50F is a new FFT analyzer used to measure and analyze electric and magnetic strengths in the 1Hz to 400 kHz frequency range. Using the weighted peak method specified in the latest released standards, the analyzer evaluates complex signal shapes in the time domain, while providing automatic frequency evaluations for many applications including power supply stations and transformers, high-tension lines, industrial equipment, and medical technology.

  2. LR Series RF Modules 11/1/2005
    The Linx LR Receiver is ideal for the wireless transfer of serial data, control, or command information in the favorable 260-470MHz band. The receiver's advanced synthesized superhet architecture achieves an outstanding typical sensitivity of -116dBm, which provides a 5 to 10 times improvement in range over previous solutions. When paired with a compatible Linx transmitter, a reliable wireless link is formed, capable of transferring data at rates of up to 10,000bps at distances in excess of 3,000 feet...
  3. Class AB Wideband RF Power Amplifier: KAW2300 9/5/2014

    This RF power amplifier covers the 100-1000 MHz frequency range and delivers up to 100 watts PEP power into a 50-Ohm load. It’s ideal for use in jammers for electronic warfare applications, as well as general commercial applications.

  4. Narda Safety Test Solutions Signal Guide 12/11/2015

    Narda Safety Test Solutions has released its private “Signal Guide” database of typical RF signal measurement result images free of charge. This database is meant to be used as a comparison of different signal result images, in order to help users distinguish between pure signals, and interference and impairments.

    Click here to access the Signal Guide.

  5. Wideband And Distributed Amplifiers 8/8/2005
    Wideband And Distributed Amplifiers
  6. A W-Band Full-Band Power Amplifier 4/24/2006
    The amplifier features inline flanges and full-band operation with typical linear gain of 15 dB
  7. X-Band Solid-State Power Amplifier: SSPA 9.0-10.0-40 12/20/2010
    Aethercomm Part Number SSPA 9.0-10.0-40 is a high power, X band, Solid State Power Amplifier that operates from 9.0 to 10.0 GHz. The saturated output power is 40 watts typical at 25ºC. Typical small signal gain is 58 dB. Noise Figure is 10.0 dB typical at 25ºC. Input VSWR is 2.0:1 maximum. Output VSWR is 2.0:1 maximum.
  8. LMA007: 6 To 18 GHz Linear Amplifier 11/20/2007
    The LMA007 is a low noise broadband solid state linear amplifier which operates over the frequency range 6 to 18 GHz. The unit incorporates integral regulation, temperature compensation and is designed for use in military environments.
  9. Power Master™ Frequency Selectable mmWave Power Analyzer: MA24507A 9/27/2016

    Power Master is an ultraportable, USB-powered mmWave power analyzer enabling simple, numeric, frequency-based measurement of RF power from 9 kHz to 70 GHz and as low as -90 dBm. Traditional power meters are broadband and have limited power ranges, so engineers and technicians are using spectrum analyzers which include many unneeded features, cost hundreds of thousands of dollars, and take up half the test bench just to make simple, frequency-based RF amplitude measurements. The Power Master enables those measurements in a USB-powered device slightly bigger than a smartphone and at a fraction of the price of a spectrum analyzer.

  10. 4.0 - 8.0 GHz, 4.0 KW Typ Solid State High Pulse Power Amplifier: AMP2083PLC-4KW 3/4/2024

    The AMP2083PLC-4KW is a solid-state high pulse power amplifier optimized for EMI/RFI, lab, HIRF, and pulse applications.