Attenuators Products

1. 200-7125 MHz Benchtop Attenuator Assembly With One Attenuator: 50BA-056-95 3/9/2023

   Model 50BA-056-95 is a 50 Ohm benchtop attenuator assembly containing one solid-state step attenuator with a range of 0 to 95dB by 1dB steps and operates from 200 MHz to 7125 MHz. 

2. 200-7125 MHz, 19" Rack Mount Attenuator Assembly With 9-16 Attenuators: 50PA-1250-XX 3/9/2023

   Model 50PA-1250-XX is a 19 inch rack mount attenuator assembly containing 50 Ohm solid-state step attenuators. The number of attenuators can be selected from 9 to 16 attenuators.

3. Solid-State Programmable Attenuator: 50P-1501 8/16/2022

   Model 50P-1501 is a 50 Ohm solid-state programmable attenuator with attenuation range 0 to 127dB by 1dB steps. It operates 200 MHz to 3 GHz and is rated for +20 dBm of RF input power. This step attenuator is available with BNC, N, or SMA coaxial RF connectors. The attenuator has seven individually controlled steps: 1dB, 2dB, 4dB, 8dB, 16dB, 32dB, and 64dB.

4. RF Fixed Attenuators With 2.4mm Connectors 3/8/2024

   Elevate your signal management capabilities with Fairview Microwave's RF fixed attenuators featuring 2.4mm connectors and high-power ratings.

5. Passive GaAs MMIC Attenuator Family: ATN00-00110CH 10/23/2023

   The ATN00-00110CH family of precision GaAs MMIC fixed attenuators are an ideal solution for attenuating a signal, and they can be used in a wide range of applications.

6. 200-7125 MHz Attenuator Assemblies For Automated Testing At 0-95dB By 1dB Steps 3/8/2023

   These attenuator assemblies operate at 200-7125 MHz with an attenuation range of 0-95dB by 1dB steps.

7. Chip Scale Package MMIC 50 GHz 10dB Attenuator: ATN10-0050CSP1 2/10/2023

   The ATN10-0050CSP1 is a surface mount GaAs MMIC 10dB attenuator in a chip scale package (CSP). This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.

8. 50W Attenuator With Cylindrical Heatsink: DC-18 GHz 8/28/2023

   Model 50HFFA-xxx-50/18 is a 50 Ohm coaxial fixed attenuator rated at 50 Watts average input power and operates DC-18 GHz.

9. Die On Carrier, Silicon Digital Attenuator: ADRF5474 6/17/2022

   The ADRF5474 is a 4-bit digital attenuator with 22 dB attenuation control range in 2 dB steps manufactured in a silicon process attached on a gallium arsenide (GaAs) carrier substrate. The substrate incorporates the bond pads for chip and wire assembly, and the bottom of the device is metalized and connected to ground.

10. NetSync™ Low Phase Noise Jitter Attenuating Clock For 5G/eCPRI/SyncE/IEEE: Si5518B 9/14/2022

    The Si5518B NetSync Network Synchronizer Clock combines the functions of a SyncE/IEEE 1588 PTP network synchronizer clock with a low phase noise 5G/eCPRI wireless jitter attenuator into a single IC device.