Products and Services

1. XP1009 17 To 21 GHz GaAs MMIC Power Amplifier 6/7/2005
   Mimix Broadband’s two stage 17.0-21.0 GHz GaAs MMIC power amplifier is optimized for linear operation with a third order intercept point of +38.0 dBm
2. XL1010-QT: 20 To 38 GHz GaAs MMIC Low-Noise Amplifier 4/2/2008
   Mimix Broadband’s three stage 20.0-38.0 GHz GaAs MMIC low noise amplifier has a small signal gain of 17.0 dB with a noise figure of 3.0 dB. The device comes in a RoHS compliant, 3x3mm QFN package and requires only a single positive bias supply.
3. 800-2500MHz MMIC Wideband Amplifier (ZAMP002H6TA) 1/21/2009
   The ZAMP002 is an low current high performance RF amplifier designed for L band and IF applications. Although the ZAMP002 has been designed primarily for DBS applications the ZAMP002 is capable of extending to frequencies of 2.5GHz so it has a good fit with various applications. An additional benefit of the ZAMP002 is it’s rising gain characteristic, this has been designed to counteract the gain losses found at the higher frequencies.
4. 25 To 33 GHz 0.7W Power Amplifier MMIC: AMMC-6431 3/29/2010
   The 25-33 GHz 0.7W Power Amplifier MMIC: AMMC-6431 from Avago Technologies is a MMIC power amplifier designed for use in wireless transmitters that operate within a 25 GHz and 33 GHz range. At 32 GHz, it provides 28.5 dBm of output power (1) and 19.5 dB of small-signal gain from a small easy to-use device.
5. MMA-061827: 6 To 18 GHz Power Amplifier MMIC Chip 7/2/2008
   The MMA-061827 is a 6-18 GHz GaAs power amplifier MMIC chip. Small signal gain is typically 8.0 dB across band. In a balanced configuration, input and output VSWR are better than 1.5:1 with a typical P1B more than 29 dBm, and a Psat of 30 dBm. The typical performance is shown below. MMA-061827 can be used in broadband EW and defense applications. Hi-rel and space screening are available.
6. Millimeter Wave Products 5/22/2007

   Northrop Grumman ST Foundry Services & MMIC Products offers low noise amplifiers, power amplifiers, switches, multipliers, mixers and attenuators for millimeter-wave applications.

7. 1W MMIC For CATV-HFC Line Extender 9/7/2010

   High definition display such as full HD, Plasma TV and LED TV is currently expanding its market share in individual homes. HD quality programs and contents are also broadcasted through various channels by satellite TV, HDTV, VOD and 3D TV. CATV cables do not only deliver cable TV, but also two-way broadband internet to each subscriber. All these contents require higher definition quality for better viewing experience.

8. MMA-121630: 12 To 16 GHz Fully Matched MMIC Power Amplifier 7/2/2008
   The MMA-121630 is a 12-16 GHz GaAs MMIC amplifier. Small signal gain is typically 26.0 dB across band. It typically provides 31 dBm power at P-1dB. This part can be used in VSAT, point to point,and defense applications, Hi-rel and space screening is available.
9. XP1001 26.0-40.0 GHz GaAs MMIC Power Amplifier 9/17/2003
   Mimix Broadband's two stage 26.0-40.0 GHz GaAs MMIC power amplifier is optimized for linear operation with a typical third order intercept point of +34.0 dBm...
10. 13.5 To 16.0 GHz GaAs MMIC Power Amplifier - XP1057-BD 7/18/2008
    Mimix Broadband’s three stage 13.5-16.0 GHz GaAs MMIC power amplifier has a small signal gain of 17.0 dB with +48.0 dBm output third order intercept.