Products and Services

  1. 1W MMIC For CATV-HFC Line Extender 9/7/2010

    High definition display such as full HD, Plasma TV and LED TV is currently expanding its market share in individual homes. HD quality programs and contents are also broadcasted through various channels by satellite TV, HDTV, VOD and 3D TV. CATV cables do not only deliver cable TV, but also two-way broadband internet to each subscriber. All these contents require higher definition quality for better viewing experience.

  2. 800-2500MHz MMIC Wideband Amplifier (ZAMP002H6TA) 1/21/2009
    The ZAMP002 is an low current high performance RF amplifier designed for L band and IF applications. Although the ZAMP002 has been designed primarily for DBS applications the ZAMP002 is capable of extending to frequencies of 2.5GHz so it has a good fit with various applications. An additional benefit of the ZAMP002 is it’s rising gain characteristic, this has been designed to counteract the gain losses found at the higher frequencies.
  3. 2-18 GHz Integrated Drive IQ Mixer: MMIQA-0218HPSM 2/21/2024

    The MMIQA-0218HPSM is a versatile, robust, and broadband IQ mixer with an integrated broadband LO driver amplifier. It is ideal for IQ, single sideband, and image reject mixing applications

  4. E-pHEMT MMIC For Femtocell, RF-Metering, RFID And Wi-Fi 10/12/2010
    Recent improvements on the CMOS Silicon process introduced many one-chip solutions to the market. DSP, Analog/Digital converter, Digital/Analog converter, Up/Down converter, VCO and PLL Synthesizers are one of those one-chip solutions in the market today. However, CMOS has some drawbacks in higher power levels of 10dBm+ and having a high noise figure.
  5. 37 To 40 GHz 1 W Power Amplifier (MMIC Die): AMMC-6442 3/29/2010
    Avago Technologies’ 37 - 40 GHz 1W Power Amplifier (MMIC Die): AMMC-6442 is a 1W power amplifier MMIC die for use in transmitters that operate at frequencies between 37 GHz and 40 GHz. Typical applications include point-to-point radio systems and millimeter – wave communications.
  6. Silicon MMIC Amplifier (BGA2001 T/R) 1/21/2009
    Silicon MMIC amplifier consisting of an NPN double polysilicon transistor with integrated biasing for low voltage applications in a plastic, 4-pin dual-emitter SOT343R package.
  7. MMA-495930-Q4 MMIC Amplifier 1/23/2007
    The MMA495930-Q4 is a high linearity MMIC amplifier utilizing MwT’s proprietary linear device technology. Packaged in low cost QFN 4X4mm Green Package, this product is specifically designed as a driver or final power amplifier stage for 802.16 applications in the 4.9-5.9GHz bands.
  8. Silicon MMIC Amplifier (BGA2003 T/R) 1/21/2009
    Silicon MMIC amplifier consisting of an NPN double polysilicon transistor with integrated biasing for low voltage applications in a plastic, 4-pin SOT343R package.
  9. E-pHEMT MMIC - AE312 6/29/2009
    AE312 is designed as low cost drive amplifiers for many applications including FTTH, CATV System. This MMIC is based on Gallium Arsenide Enhancement Mode pHEMT which shows low current draw and very low noise.
  10. E-pHEMT MMIC (50 ohm) Product Line 7/12/2010

    The E-pHEMT MMIC (50 ohm) Product Line can be used in applications including Cellular/GSM, PCS, DCS, W-CDMA, Wibro, WiMax, WiFi, Tetra, CATV, Satellite system, RFID, Femtocell, and Multi-metering.