Featured Products

  1. RF Point-Of-Load (POL) Regulator: ACT41000 11/19/2021

    Qorvo's ACT41000 is a programmable output, low noise, DC-to-DC buck converter with auxiliary bias supply regulators. This synchronous step-down voltage regulator supports a wide input voltage from 4.5 to 40 V and integrates both the high side and low side MOSFETS.

  2. CATV Hybrid Amplifier: QPA9831 7/30/2021

    The QPA9831 is a Hybrid Push Pull amplifier module. The part employs GaAs MESFET, GaAs pHEMT and GaN HEMT die and is operated from 45 MHz to 1218 MHz. It provides excellent linearity and superior return loss performance with low noise and optimal reliability.

  3. Power Amplifier: QPA2513 7/30/2021

    The QPA2513 is a 2-stage S-Band internally matched GaN Power Amplifier Module. The QPA2513 operates at pulsed RF CW in frequency range 3.1 -3.5 GHz providing typically 51dBm of saturated output power with 30dB of large-signal gain and 62% of power added efficiency.

  4. Ultra Low Noise, Flat Gain LNA: QPL9504 7/2/2021

    The QPL9504 is a flat gain, high-linearity, ultra low noise amplifier in a small 2 x 2 mm surface-mount package. At 5.5 GHz, the amplifier provides 0.7dB noise figure with 21.5 dB gain and +34 dBm OIP3 while drawing 55 mA bias current.

  5. 48 Volt Asymmetric Doherty: QPD0010 4/1/2021

    Lead-free and RoHS compliant, the QPD0010 by Qorvo is an asymmetric, dual-path, discrete GaN on SiC HEMT in a DFN package. Typical applications include 5G massive MINO, active antenna, small cell, macro/micro cell base station and more.

  6. SAW Based Triplexer Filter Module: QPQ1214 4/1/2021

    The QPQ1214 by Qorvo is a SAW based triplexer filter module. This module was specifically designed in a 4 x 5 mm package, comprised of three SAW dies and passive SMT components.

  7. 5GHz Wi-Fi UNII2c-3 BandBoost BAW Filter: QPQ1904 3/15/2021

    The Qorvo® QPQ1904 is a high-performance, high power, Bulk Acoustic Wave (BAW) band-pass filter, featuring extremely steep skirts that simultaneously exhibit low loss in the Wi-Fi UNII2c-3band and high near-in rejection in the UNII1-2a band.

  8. 5GHz Wi-Fi UNII1-2a BandBoost BAW Filter: QPQ1903 3/15/2021

    The Qorvo® QPQ1903 is a high-performance, high power, Bulk Acoustic Wave (BAW) band-pass filter, featuring extremely steep skirts that simultaneously exhibit low loss in the Wi-Fi UNII1-2a band and high near-in rejection in the UNII2c-3 band.

  9. 0.6 - 4.2 GHz Low Noise Amplifier: QPL9057 5/6/2020

    Qorvo delivers the QPL9057 flat-gain, high-linearity, ultra-low noise amplifier (LNA) designed to provide robust, high performance over the 0.6 - 4.2 GHz frequency range. The LNA features gain flatness of 2.4 dB (peak-to-peak) over a wide bandwidth from 1.5 to 3.8 GHz. At 3.5 GHz, the amplifier typically provides 22.8 dB gain, +32 dBm OIP3 at a 50 mA bias setting, and 0.54 dB noise figure.

  10. 2 – 20 GHz, 10 Watt GaN Amplifier: TGA2962 5/6/2020

    Qorvo offers the TGA2962 wideband power amplifier MMIC covering the 2 – 20 GHz frequency range for communication systems, electronic warfare, radar, and test equipment applications. The TGA2962 provides 10 W of saturated power with 13 dB large signal gain and 22 % power-added efficiency at 22 V drain bias. RF ports are matched to 50 Ω, including integrated DC blocking capacitors and a RF choke.