Products and Services

  1. Broadband Limiting Amplifier: BXL9812 3/10/2014

    The BXL9812 is a limiting amplifier with a 2-stage design and an 8-12 GHz operating frequency range. It features a +10 dBm flat saturated output power, an internal voltage regulator with reverse bias protection, and an operating temperature range of 25oC to +75oC.  Additionally, the it allows for input levels from -20 dBm to -10 dBm.

  2. 30 Watts CW 0.7 – 6 GHz Solid-State Amplifier: 30S1G6 3/6/2014

    AR’s 30S1G6 is a solid-sate amplifier covering the 0.7 – 6 GHz frequency range. When used with a sweep generator, it provides a minimum of 30 watts RF power. Like most of AR’s amplifiers, this model is ideal for applications that call for instantaneous bandwidth and high gain.

  3. 10,000 Watt RF Power Amplifier: 10000A225A-A 12/11/2013

    This RF power amplifier offers 10,000 watt CW and covers the 10 kHz to 225 MHz frequency range. It’s ideal for applications that involve RF susceptibility testing, antenna and component testing, communications, watt meter calibration, plasma generation, particle accelerators, and for use as a driver for high power amplifiers.

  4. 80-1000 MHz Solid-State Amplifier: 1000W1000F 10/25/2013

    This self-contained solid-state amplifier covers the 80 MHz to 1000 MHz frequency range and features lowered distortion and improved stability through the use of push-pull circuitry. When used in conjunction with an RF sweep generator, this amplifier can provide 1000 watts (min) of swept power.

  5. 500 Watts CW Solid-State Amplifier: 500W1000B 7/1/2013

    This solid-state amplifier covers the 80 MHz to 1000 MHz frequency range and uses push-pull circuitry in its higher power stages in order to lower distortion and improve stability. It’s particularly well suited for applications that require an amplifier with high gain and instantaneous bandwidth.

  6. Solid State Broadband High Power Amplifier: 1163-BBM2E3KLO 11/1/2012

    This solid state broadband high power amplifier operates in the 20-520 MHz frequency range and delivers 125 Watts output power. It’s suitable to use as a broadband PA building block in applications involving electronic attack, digital communications, and test and measurement in the UHF/VHF bands.

  7. Broadband CATV Amplifier: MAAM-010373 10/17/2012

    This broadband amplifier operates in the 50-1100 MHz frequency range and features low distortion, high gain, and a low noise figure. It’s ideal for CATV applications. The amplifier is supplied in a lead-free surface mount package. A 75Ω input/output impedance, minimizing the number of required external components.

  8. Broadband Amplifier Systems: 7000 Series 10/15/2012

    Ophir RF’s 7000 series consists of ten different broadband amplifier systems covering a wide frequency range. Each model features variations in output power, harmonics, spurious signal parameters, and more. These amplifiers are ideal for both military and commercial applications.

  9. Broadband RF Power Amplifier: 5 MHz to 1000 MHz 10/15/2012

    The 5322 broadband RF power amplifier is small, lightweight, and designed for lab environments. It operates in the 5 to 1000 MHz frequency range and has a 15 W (typ) saturated output power. This amplifier has a +43 dB (min) small signal gain, +45 dBm (typ) IP3, -20 dBc (typ) harmonics @ 5 watts, and <-60 dBc (typ) spurious signals @ 5 watts. Additional specifications can be found on the available datasheet.

  10. Broadband High Power RF Amplifier: 20 MHz to 1000 MHz 10/15/2012

    Ophir RF’s 6010 broadband high power RF amplifier is ideal for NMR applications. It operates in the 20 to 1000 MHz frequency range and has a saturated output power of 125 Watts (min). It also has +52 dB (min) small signal gain, 50dB (min) blanking, <5uS blanking speed, -20 dBc (typ) harmonics @90 Watts, >-60 dBc (typ) @90 Watts, and much more. Additional specifications can be found on the available datasheet.