Products and Services

  1. 0.6 - 4.2 GHz Low Noise Amplifier: QPL9057 5/6/2020

    Qorvo delivers the QPL9057 flat-gain, high-linearity, ultra-low noise amplifier (LNA) designed to provide robust, high performance over the 0.6 - 4.2 GHz frequency range. The LNA features gain flatness of 2.4 dB (peak-to-peak) over a wide bandwidth from 1.5 to 3.8 GHz. At 3.5 GHz, the amplifier typically provides 22.8 dB gain, +32 dBm OIP3 at a 50 mA bias setting, and 0.54 dB noise figure.

  2. 5 GHz LNA With LAA Support Front-End Module: SKY5®-5501-11 4/20/2020

    Skyworks offers the SKY55501-11 as a highly integrated, 5 GHz front-end module (FEM) that supports simultaneous 5G WLAN and licensed assisted access (LAA) systems. It incorporates a 5 GHz low-noise amplifier (LNA) with bypass supporting 5G WLAN and LAA simultaneous RX reception, and a single-pole, double-throw (SPDT) transmit/receive (T/R) switch.

  3. Low-Noise Amplifiers For High-Reliability Space And Military Applications: SKYH22002 2/26/2020

    Skyworks offers the SKYH22002 ultra-broadband hermetically sealed low-noise amplifier with superior gain flatness and exceptional linearity. Ideal applications include L-, S-, and C-band communications, radar and weather satellites, test and measurement, extreme industrial and medical equipment, and aerospace and defense applications.

  4. Low Noise Amplifier: LNA-30-00104000-75-15P 12/3/2019

    The LNA-30-00104000-75-15P from L3 Harris Narda-Miteq is a low noise amplifier (LNA) that operates from 0.1 to 40 GHz. It provides a gain of more than 30 dB with a noise figure of 7.5 dB and a P1dB of over 15 dBm. The amplifier requires a supply of 15 V and consumes up to 500 mA of current.

  5. 2.4 GHz ZigBee®/Thread/Bluetooth® Smart Front End RFIC: BFM4120 7/29/2019

    Berex offers the BFM4120 compact, multi-function Front-End RFIC (Radio Frequency Integrated Circuit) designed for 802.15.4 ZigBee™/ Thread, Bluetooth® Smart, and ISM wireless protocol systems in the 2.4 GHz band. The device combines a transmit power amplifier, receive low noise amplifier, a single-pole double-throw transmit/receive switch.

  6. High-Power Switch LNA Module: QPB9314 5/9/2019

    Qorvo offers the QPB9314 highly integrated front-end module with operation in the 2.3 – 2.7 GHz frequency range ideally suited for TDD base station, wireless infrastructure, and macro or picocell base station applications. This LNA module integrates RF functional blocks such as a pin-diode based high power switch along with two LNA stages.

  7. Ultra-Low Noise Amplifier For SDARS/Compenser/GPS Applications 3/28/2019

    Guerrilla RF offers the GRF2073-W linear, ultra-low noise amplifier designed for automotive satellite radio multi-stage LNAs, signal booster and GPS applications. With its ultra-low noise and high gain characteristics, this amplifier is an ideal first-stage LNA solution for high-performance, multi-stage SDARS LNA designs. With superior performance, it offers a drop-in alternative to legacy SDARS LNA solutions.

  8. Dual-Channel Switch LNA Module: QPB9337 3/8/2019

    Qorvo offers the new QPB9337 highly integrated front-end module with operation in the 2.8 – 3.8 GHz frequency range for TDD base station, wireless infrastructure, small cell BTS, and pre-5G/5G massive MIMO applications. This LNA module integrates a two-stage LNA and a high-power switch in a dual-channel configuration.

  9. Broadband LNA For High-Reliability Space And Military Applications: SKYH22001 2/20/2019

    Skyworks offers the SKYH22001 ultra-broadband hermetically sealed low-noise amplifier with superior gain flatness and exceptional linearity. Ideal applications include L and S band communications, radar and weather satellites, test and measurement, extreme industrial and medical equipment, as well as aerospace and defense applications.

  10. Two Stage, High Linearity And High Gain Low-Noise Amplifier: SKY67180-306LF 12/5/2018

    The SKY67180-306LF low-noise amplifier (LNA) operates in the 1.5 – 3.8 GHz frequency range and features active bias and high linearity performance. In addition to the high linearity, the output stage also provides high gain. The advanced GaAs pHEMT enhancement mode front end device provides ultra-low noise figure. Stable performance over temperature and process variation are a direct result of the amplifier’s active bias circuitry.