5G Products

  1. High-Gain Low-Noise Amplifier: SKY67181-396LF 3/26/2021

    The SKY67181-396LF by Skyworks is a wide-band, low-noise amplifier featuring superior gain flatness and exceptional linearity. Designed for 4G LTE and 5G NR infrastructure systems, this amplifier operates from 3300 to 5000 MHz and has a compact 2 x 2 mm with an 8-pin, Dual Flat, No Lead package.

  2. Mid- And High-Band Front-End Module For 3G, 4G, And 5G Applications: SKY5®-8085-11 11/20/2020

    The SKY58085-11 is a mid- and high-band front end module (FEM) designed to support 3G/4G/5G mobile devices and operate efficiently in 3G/4G/5G modes. This model meets stringent 5G NR and LTE advanced requirements where wider bandwidth and carrier aggregation are utilized for high data rates.

  3. 8 Channel A/D & D/A Zynq UltraScale+ RFSoC Processor PCIe: Model 7050 7/29/2020

    The Model 7050 from PENTEK is an 8-channel high-performance PCIe board based on the Xilinx® Zynq® UltraScale+™ RFSoC. With an on-board GPS receiver and 16 GB of DDR4 SDRAM, this device is ideal for high-bandwidth data streaming, waveform signal generators, multimode data acquisition, remote monitoring, and 5G development.

  4. Dual 2.4 GHz, 802.11ax High-Linearity, High-Efficiency Front-End Module: SKY5®-5242-11 4/30/2020

    Skyworks offers the SKY5®-5242-11 dual 2.4 GHz, 802.11ax high-linearity, high-efficiency front-end module (FEM) specifically designed for Wi-Fi 6 enabled devices including handsets, tablets, and mobile devices supporting WLAN and Bluetooth® protocols.

  5. 26.5 to 50 GHz Dual Directional Coupler: Model 526550010 4/6/2020

    The Krytar Model 526550010 dual-directional coupler covers the 26.5 to 50 GHz frequency range and is ideal for use in power sampling and measurement, amplifier leveling, VSWR monitoring, field control, and amplifier and load protection. The new directional coupler lends itself to wireless designs and many test and measurement applications for the emerging mmWave and 5G markets.

  6. Filter Products For 5G FR2 Bands 5/15/2019

    Knowles Precision Devices (DLI) offers filter technology that addresses the challenge of implementing high-performance filters at mmWave frequencies. Their 26 GHz, 28 GHz, and 39 GHz filter solutions deliver 3 GHz of bandwidth, provide greater than 50 dB rejection, and are 20x smaller than current alternatives while implemented in surface mount packages for standard tune-free assembly. They are capable of stable operation within the -55°C to 125°C temperature range. Custom design services are available.

  7. 5G Fixed Wireless Access 5/7/2019

    Fixed Wireless Access (FWA) is one of the early planned use cases for 5G deployment, offering a new wireless alternative for providing broadband to homes and businesses.  Because this requires very high bandwidth, many solutions for FWA consider use of new millimeter wave bands. This poses challenges for coverage, including increased path loss, weaker penetration through walls into the interiors of structures, and greater effects from shadowing of structures and trees on the outdoor propagation.

  8. 5G Urban Small-Cell Analysis 5/7/2019

    With a tremendous increase in the number of connected devices and mobile data demand predicted over the next decade, the wireless communications industry is exploring new technologies to accommodate 5G wireless data systems, including MIMO (multiple-input, multiple-output) technology and millimeter wave frequency bands.  One of the more complex environments for these technologies are urban small cells, where the prevalence of multipath and non-line-of-sight conditions leads to many challenges, particularly at higher frequencies.

  9. 10-110 GHz Directional Coupler: 1100110010 4/26/2019

    KRYTAR offers the Model 1100110010 Directional Coupler operating in the 10 to 110 GHz frequency range and delivering exceptionally flat nominal coupling of 10 dB across the full bandwidth. Ideal for wireless designs and many test and measurement applications for emerging mmWave and 5G markets, the coupler can be manufactured to meet military specifications.

  10. Custom Waveguide Circulators For 5G Infrastructure 4/26/2019

    Skyworks offers the SKYFR-001692 and the SKYFR-001657 as the newest models in the family of mini circulators for 5G infrastructure. These ultra-compact, high performance circulators demonstrate unique capabilities to enhance network efficiency and deliver higher capacity with greater coverage.