Products and Services

41. Ultra High Dynamic Range MMIC Amplifier - PHA-1+ 9/15/2009

    The Mini-Circuits PHA-1+ Ultra High Dynamic Range MMIC Amplifier supports low intermodulation amplification over the broad frequency range of 50 MHz to 6 GHz. This design provides a unique combination of high output IP3 (typically +42 dBm) while maintaining a noise figure less than 3 dB up to 4 GHz and typical gain of 14 dB at 2 GHz.

42. GaN Amplifier For Standard Weather Radar Applications: CA56-G411 5/3/2010
    Ciao Wireless' Model CA56-G411 is a GaN based amplifier optimized for standard Weather Radar applications among other radar types, with frequency coverage from 5.5 to 5.7 GHz. This GaN Amplifier model has 35 dB of gain with +36 dBm Output Power at the 1 dB Compression Point and with up to +38 dBm of Saturated Output Power from a +28VDC supply. The Ciao design is balanced and features very good input and output VSWR (2.0:1 MAX) and is unconditionally stable over all conditions. This GaN Amplifier features Ciao Wireless' standard hi-rel production standards and is made for use in all Applications both commerical and military.
43. DPDT Latching Coaxial Switches 12/21/2006
    Dow-Key Microwave provides DPDT latching coaxial switches for commercial, military, avionics, and space applications
44. NI VirtualBench All-in-One Instrument 2/4/2015

    Radically Practical!  By combining the most essential instruments into one device and integrating with PCs and iPads, the VirtualBench all-in-one instrument is simple, is convenient, and opens up new possibilities for how you can interact with benchtop instruments.

45. 7.9 - 11 GHz, 15 Watt GaN Power Amplifier: QPA1010, QPA1010D 9/14/2021

    Qorvo's QPA1010, QPA1010D are X-band high power MMIC amplifiers, fabricated on Qorvo's production 0.15um GaN on SiC process (QGaN15). These amplifiers operate from 7.9 - 11 GHz and typically provide 15 W saturated output power with power-added efficiency of 38% and large-signal gain of 18 dB.  

46. L, S, C Band Ceramic RF Band Pass Filters 8/30/2021

    Skyworks is pleased to introduce its L, S, and C Band Ceramic RF Band Pass Filters for GPS, TCAS, Portable Transceiver, Homeland Security Radio, 5G, IOT, and medical-based systems. 

47. Coaxial Test Probe Solutions For Testing And Developing Circuits 6/27/2016

    Pasternack offers a new line of semi-rigid coaxial test probes designed specifically for assisting in testing microwave circuits. These probes can be used to make sampling measurements without creating a separate subassembly circuit board or adding a connector to the circuit layout. Available in three different diameters of semi-rigid coax, and 3, 6, 9, or 12 inch lengths, these cable assemblies can fit a variety of trace widths and applications.

48. Multi-Octave RF Upconverter: RF2-3000UCV1 3/28/2012

    This Multi-Octave RF Upconverter is ideal for applications involving test bed developments, software defined radios, waveform generators, RF signal generators from 2 MHz to 3 GHz, and in Joint Tactical Radio Systems.

49. Electromagnetic Environment Modeling And Simulation Tool For Virtual Testing: Galileo Suite 12/2/2016

    The Galileo Suite from IDS is an electromagnetic environment modeling and simulation tool designed for use in virtual testing applications within the naval, aeronautical, and space industries. From single antennas to complex platforms, the Galileo Suite assists engineers in the design and simulation of electromagnetic systems and devices.

50. Thermal Vacuum Test Cables: Altitude T-Vac™ 11/7/2012

    These test cables are ideal for applications involving vacuum chambers, climatic chambers, thermal shock chambers, and vibration/shock equipment.