Products and Services

  1. SP Series Antennas 1/26/2006
    The Linx Splatch uses a grounded-line technique to achieve outstanding performance from a tiny surface-mount element. This unique antenna is designed for hand or reflow mounting directly to a product's circuit board. Its low cost makes it ideal for volume applications. Unlike many compact antennas, the Splatch exhibits good proximity performance, making it an appropriate choice for hand-held applications such as remote controls, pagers, and alert devices. Typical performance is below that of some external antennas, but the Splatch is an excellent choice when cosmetic or mechanical issues dictate the use of an internal antenna.
  2. 125-167 MHz 650W VHF Band Transistor 7/7/2005
    The high power pulsed transistor part number IDM165L650 is designed for VHF-Band systems operating at 125-167 MHz. Operating at a pulse width of 1ms with a duty factor of 20%, this dual MOSFET device supplies a minimum of 650 watts of peak pulse power at a fixed input power of 80 watts across the instantaneous operating bandwidth of 125-167 MHz...
  3. VCXO 5/1/1998
    Cardinal Components CTV6 voltage-controlled crystal oscillator is designed for Personal HandyPhone System (PHS) phones, PCS handsets, and GPS equipment
  4. FEC Chips 1/19/2001
    The latest addition to the company’s family of FEC products, the 2Kbit Astro LE (AHA4522), operates at standard channel rates up to 35 Mbit/sec...
  5. YIG-tuned Oscillator: Model LPO-0408-530-01 7/2/2012

    The LPO 3-10 GHz series of YIG tuned oscillators provides excellent phase noise (typically better than  -104 dBc/Hz @ 10 kHz) in a low profile package. The FM coil bandwidth is typically greater than 3.5 MHz, allowing for faster frequency modulation and greater PLL bandwidths in synthesizer design applications.  As an added feature, all oscillators of this series use a single positive 12 V supply.

  6. IE3D - Scalable EM Simulation Solution 8/10/2005
    IE3D from Mentor Graphics, formerly Zeland Software is the first SCALABLE EM design and verification platform that delivers the modeling accuracy for the combined needs of high-frequency circuit design and signal integrity engineers across multiple design domains.
  7. 16-Way SMA Female Power Dividers 6/13/2012

    16 Way N Female Power Dividers from MECA feature an operating temperature range of -55° C to +85° C and 50 ohm impedance (nominal). Additionally, they operate up to 4.2 GHz. 

  8. 3.3 To 5V Linear Wireless Data Power Amplifier for 2.3 To 2.7 GHz Operation - ALM-42216 6/27/2008
    Avago Technologies’ ALM-42216 is a fully-matched Power amplifier module for use in the (2.3-2.7)GHz band. High linear output power at 3.3V is achieved through the use of Avago Technologies’ proprietary 0.25um GaAs Enhancement-mode pHEMT process.
  9. C Band Power Amps 5/12/1999
    Three power amplifiers are designed to operate at the C-band frequencies
  10. Switch/Low-Noise Amplifier Front End Modules: SKYA21040, SKYA21041 5/21/2018

    Skywork’s SKYA21040 and SKYA21041 are front end modules comprising a single-pole, double-throw (SPDT) switch (41) or a single-pole, triple-throw (SP3T) switch (40) and a low-noise amplifier (LNA) with a bypass mode.